The Ultimate Guide to Cleaning Your Bushnell Binoculars

Affiliate Disclaimer

As an Amazon Associate, I earn from qualifying purchases. It supports the website. So, Thank you. ❤️

Bushnell binoculars are an iconic product and a great way to get a close-up view of the world around you.

However, just like any other object, they can develop dust and grime over time. 

So, let us not damage our favorite Bushnell binoculars.

And learn how to clean Bushnell binoculars using simple steps without damaging them.

What do you need to clean Bushnell binoculars?

To clean Bushnell binoculars, you will need:

Buy them all from one place, amazon.

How to clean Bushnell binoculars?

First, remove the eyepieces by unscrewing them. 

Then, use a cotton swab wrapped in lens cleaning fluid to clean the inside of each lens. 

Finally, use a lint-free cloth to wipe down the exterior of the binoculars.

Make sure your binoculars are clean before beginning the cleaning process. Remove any dirt or debris that may be on the lenses with a cloth or lens brush. 

If your lenses require using a cleaner such as a lens cleaner or eye cleaner, use it according to the manufacturer’s instructions.

Avoid using a very acidic solution; this will damage the optics and increase the likelihood of corrosion. 

Allow your binoculars to dry completely before storing them in their case or carrying them around in your pocket.

How To Clean Binoculars Outside?

Let us first clean the outside of the Bushnell binocular: 

1. Make sure the optics are clear before starting: If there is any dirt, dust, or pollen on the lenses, it will cause blurry images. Take the time to clean the optics before using your binoculars.

2. Use a binocular cleaner: If you want to go above and beyond, you can use a binocular cleaner specifically designed for optics. Be sure to read the instructions before using this type of cleaner, as some require special precautions (like using water instead of rubbing alcohol).

How to clean binocular lenses?

Cleaning any optics can be a daunting task, but with a little know-how and the right supplies, it can be a breeze. Here are five tips for cleaning binocular lenses:

  • 1. Use warm soapy water and a soft cloth.
  • 2. Dilute vinegar in water until it is slightly acidic (about 3%).
  • 3. Wet the cloth and wring out the water. Apply the cloth to the lens and work the solution around the lens.
  • 4. Rinse with clean water and dry with a soft cloth.
  • 5. Apply a dusting of cornstarch to the lens before storage to prevent potential staining.

How to clean the inside of binoculars?

Cleaning the inside of binoculars is a simple process that can help keep your eyes safe and comfortable. Follow these steps to clean the inside of your Bushnell binoculars:

  • 1. Remove the eyepieces by gently unscrewing them. Be careful not to scratch the lenses.
  • 2. Remove any dirt, dust, or other debris with a soft cloth or a camel’s hair brush.
  • 3. Clean the lenses using a mild, non-abrasive cleaner and water. Be sure to rinse off the cleaning solution and dry the lenses thoroughly before replacing the eyepieces.

How to clean the rubber eyecups on binoculars?

To clean the eyecups on Bushnell binoculars, start by soaking them in a bowl of warm water for about 15 minutes. This will soften the wax and make it easier to remove. 

After the eyecups have soaked, use a cloth or paper towel to blot them dry. 

Finally, use rubbing alcohol to reach into the tiny cracks and pores in the rubber eyecups and clean them up. 

Be sure to work from the edge of the cup towards the center, so you don’t scratch the lenses.

This simple cleaning procedure should help keep your optics looking good for years to come.

Best practices on how to maintain clean binoculars

When you take care of your binoculars, you ensure that they stay in good condition and perform at their best. 

how to maintain clean binoculars
How to maintain clean binoculars

Follow these tips to keep your Bushnell binoculars clean and performing at their best:

  • 1. Always store your binoculars in a light-tight case when not in use. This will help keep the optics clean and free from dust and other debris.
  • 2. Use a soft, lint-free cloth to clean the lenses and objective lens surfaces. Be sure to use a circular motion to avoid smearing or scratching the surface.
  • 3. Never spray or wipe the binoculars with any kind of solvent – this could damage the finish. Instead, use a mild soap and water solution or a glass cleaner designed specifically for optical equipment.
  • 4. Store your binoculars in a cool, dry place when not in use – this will help prevent moisture from causing corrosion on the metal parts.

Conclusion

It feels bad to lose the things you love. 

It can be a person or even a simple gadget.

I am a hunter! And I love everything about hunting.

I don’t want to damage my favorite binoculars due to a lack of cleaning.

I know you feel the same. 

So, let us clean our favorite Bushnell binoculars together and save our love and passion.

Don’t forget to send me your washing binocular moment. 

I want to see that bright smile of yours! Happy Hunting!

FAQ on How to clean Bushnell binoculars 

  1. Can binoculars get wet?

    Yes, binoculars can get wet. This is because they are designed to be used in wet conditions. 
    However, make sure that you never submerge the binoculars in water. 
    If they do get wet, you can dry them off with a cloth or paper towel.

  2. Why do binoculars get sticky?

    How do binoculars get sticky? It’s all due to the oils and sweat on our hands. 
    When we hold the binoculars close to our eyes, the oils and sweat on our fingers combine with the dirt and sand on the lenses to create a sticky mess.

  3. Can you take the binoculars apart?

    Yes, Bushnell binoculars can be disassembled. The process is relatively easy and can be done by anyone with a bit of patience and some basic tools. 

Leave a Comment